FONESTAR DMX-83 Mode D'emploi page 2

EN
DESCRIPTION
DMX controller 512 of 192 channels Allows you to control lighting units connected on the same line, with 12
accesses of up to 16 channels. It has 6 chase memories with 240 programmable scenes each, distributed
among 30 memory banks of 8 scenes each.
Manual, automatic or sound activated control by means of the built-in microphone.
Allows you to control and program spectacular light shows with speed and efficiency in party rooms,
pubs, discotheques and on stages
CONTROLS AND FUNCTIONS
FRONT PANEL
SCANNERS 1-12: buttons that allow you to activate or deactivate each scanner. You can activate as
1.-
many scanners as you want at the same time to control different groups of lighting fixtures. The LED
indicator on each scanner will appear green when it is active. For more information see the DEFINITION
section.
PAGE A, PAGE B: LED indicators for the PAGE A/B button selection.
2.-
SCENES: buttons that allow you to activate or record different scenes. For more information see the
3.-
DEFINITION section.
4.- A display which shows all the information concerning the instantaneous value of the selected channel
and the programming that has been executed:
a.- Active blackout function indicator.
b.- Step indicator.
c.- Programming mode activation indicator.
d.- Indicates the digits of the active chase
number .
e.- Indicates the digit of the active scene
number.
f.- Indicates the digit of the bank number in which the scenes are stored.
g.- Indicates the digits of the time assigned with FADE TIME and SPEED controls.
h.- Sound activation mode indicator.
i.- Automatic mode indicator.
- 2 -