Technical Specifications - FONESTAR DMX-83 Mode D'emploi

EN
GENERAL SECURITY RECOMMENDATIONS
- Do not under any circumstances access the internal parts of the device.
- Make sure that the devices are at least 50 cm away from flammable substances or elements.
- Looking at the laser beams from any distance less that 15 cm can cause serious damage to the eyes, as
can direct exposure to radiation for more than 10 seconds.
- Continuously switching the units on and off will result in a decreased life span of the units.
- These devices should only be used in areas that are refrigerated and under cover.
- Do not move or handle the appliances while they are connected to the mains and in operation.
- Do not modify the lighting elements of the devices without technical supervision or with any materials that
are not approved by the supplier.

TECHNICAL SPECIFICATIONS

CHARACTERISTICS
OUTPUTS
OWER SUPPLY
DIMENSIONS
DMX-83
192-channel DMX 512 controller.
Allows control of 12 luminaries with up to 16 channels.
8 sliding controls that can be assigned to channels 1 to 8 or 9 to 16 for each
access.
6 chase memories with 184 scenes.
240 scenes in 30 memory banks of 8 scenes each.
8 scenes with direct selection.
Programmable automatic sequence controlled by speed and time faders.
Manual control, automatic or sound activation via built-in microphone.
Blackout function.
DMX OUT, XLR 3 pin male XLR
9 V DC, 300 mA with adapter included
482 x 132 x 73 mm depth. 3 U 19" rack
- 12 -