Honeywell RTH2310 Mode D'emploi page 10

Masquer les pouces Voir aussi pour RTH2310:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Operating Manual
Select the system setting
NOTE: When you place the thermostat in Cooling mode, you might need to wait up to
five minutes before cooling can start. This is a safety feature for the compressor.
flash on the screen until cooling starts.
CAUTION: EQUIPMENT DAMAGE HAZARD
Do not use Cooling mode when the outdoor temperature is below 50 °F (10 °C).
Use the System switch to place the system in one of the
following modes:
• Heat: System is in Heating mode.
• Off: System is off.
• Cool: System is in Cooling mode.
8
will

Publicité

Chapitres

Table des Matières
loading

Table des Matières