In Case Of Difficulty - Honeywell RTH2310 Mode D'emploi

Operating Manual

In case of difficulty

Screen is blank.
Temperature settings cannot be
changed.
is flashing.
HI appears on the screen.
LO appears on the screen.
• Ensure two fresh AA alkaline batteries are
correctly installed.
• You are setting the temperature outside its
allowable range:
• Heat: 41 °F to 82 °F (5 °C to 28 °C )
• Cool: 59 °F to 95 °F (15 °C to 35 °C)
• The compressor protection delay is underway.
Wait for the delay to end (maximum of 5 minutes).
• The ambient (measured) temperature is above
122 °F (50 °C).
• The ambient (measured) temperature is below
23 °F (-5 °C).
18