Repairing The Printer; Shut-Down; Disposal; Technical Data - GOK Leak Check LPG PRO Notice De Montage Et De Service

REPAIRING THE PRINTER

SHUT-DOWN

If the electronic test device and printer are not being used or are being stored unattended,
both main switches must be in the OFF position.
If the electronic test device and printer are being stored for some time, they must be stored in
a suitable cool, dry place. Storage temperature should not exceed 20°C.
The battery of the electronic test device requires no maintenance and must not be opened!
The battery is destroyed in case of deep discharge. Therefore, the battery should be charged
using the enclosed wall plug transformer:
• when "LO BAT" is displayed
• or if storage time will exceed one month

DISPOSAL

To protect the environment, our products may not be disposed of along with
household waste.
The product must be disposed of via a local collection station or a recycling station.

TECHNICAL DATA

Power supply
Lead acid battery
Power consumption from wall plug
transformer
Dimensions
Housing
Connection plug (wall plug transformer)
Connection plug, power supply for
printer
Connection plug RS-232 interface for
external printer
Pressure measurement range
Accuracy of pressure measurement at
20°C
Ambient temperature during operation
Ambient temperature during storage
part no. 27 105 51
Elektronic test device Leak Check LPG PRO
Wall plug transformer (included with delivery)
12 V, 1.2 Ah, maintenance-free, VDS mark
Type 45 – 110 mA at 15 V plus the charging
current for battery (max. 500 mA)
190 mm x 105 mm x 56 mm without plug
Euro aluminium housing
5.5 mm jack socket
2-pole plug type ASP051 angled
low voltage plug
3-pole plug type ASP051
9-pole Sub-D plug (like PC-COM interface)
0 ... 200 mbar, overload-proof to 1 bar
140 ... 160 mbar : +/ 2 mbar
15°C ... 40°C, ideally 15°C ... 25°C
10°C ... 30°C, the higher the temperature,
the faster the battery will discharge
PIN control on the printer
If the PIN is adjusted during
printer maintenance, it must
be reset according to layout
opposite:
ON position: push white
pins:1, 3, 4, and 7
upward
11 / 12