Manuels Connexes pour HP LaserJet 1200
Sommaire des Matières pour HP LaserJet 1200
- Page 1 LaserJet 1200...
- Page 2 Part 15 of FCC rules. consequential, or other damage alleged in connection with the furnishing or use of this information. For more regulatory information, see the HP LaserJet 1220 electronic user guide. Garantie Les informations contenues dans ce document sont susceptibles d’être modifiées sans préavis.
- Page 3 Review package contents. Make sure all parts are included. Prepare the location. Place on a sturdy, level surface. Allow space for 1) HP LaserJet 1200 series printer. 2) Toner cartridge (in protective bag). ventilation. Allow space behind the printer for output from the 3) Getting Started Guide.
- Page 4 Regulate the environment. Do not place in direct sunlight. Ensure the environment is free from abrupt temperature or humidity changes. • Temperature—10° to 32.5° C (50° to 91° F). • Relative humidity—20% to 80%. Kontroller omgivelserne. Printeren må ikke placeres i direkte sollys. Undgå...
- Page 5 Assembly/Montage Open the toner door. Pull the sides of the door forward until the door Remove the left side panel. 1) Grasp the left side panel using the finger locks in its open position. Leave the door open until step 7. hole.
- Page 6 Collegare il cavo parallelo o USB alla stampante. La stampante Rimontare il pannello laterale sinistro. 1) Inserire le linguette del HP LaserJet 1200 è dotata di porta USB e parallela. Collegare un cavo pannello laterale sinistro dietro i bordi del pannello frontale. 2) Chiudere il alla porta appropriata e fissarlo nell’alloggiamento.
- Page 7 Prepare the toner cartridge. Remove the toner cartridge from the plastic Install the toner cartridge. Insert the cartridge into the printer, making bag. Remove the mylar tape by breaking the tab on the left and pulling the sure that the toner cartridge is in position. tape completely out.
- Page 8 Close the toner door. The toner cartridge engages when the door is Install the printer trays. 1) Leave the printer media input trays taped closed. together. 2) Slide the complete assembly in at an angle and then down until it fits securely in the printer. 3) Remove the tape and lift off the printer priority media input tray (top tray).
- Page 9 1) Place the media into the media input tray. Slide the guides until they are Test the printer. Wait until the ready light is illuminated and press the Go flush with the media. 2) Install the printer priority media input tray. button.
- Page 10 Install the printer software. Insert the CD for your software installation or Installing on Windows. 1) Select Software Installation from the autorun go to the Plug and Play section. screen. If autorun does not occur, select Start, select Run, and type x:\setup (where x is the letter of your CD-ROM drive).
- Page 11 2) Kør Apples desktopprinterprogram. 3) Vælg når installationen er fuldført. HP Printer (USB). 4) Klik på Skift. 5) Vælg HP LaserJet. 6) Klik på Automatisk, og klik derefter på Opret. 2) Führen Sie die auf dem Bildschirm angezeigten Schritte aus. Klicken Installation auf dem Macintosh (USB).
- Page 12 Go button. troubleshooting information as well as service and support information. Tillykke! Dit HP LaserJet 1200-produkt er klar til brug. Se den Fejlfinding af printeren. 1) Kontroller netledningen, hvis ingen indikatorer elektroniske brugerhåndbog for at få oplysninger om fejlfinding samt lyser, og tryk derefter på...
- Page 13 DIMM, if necessary. 4) If all lights are on, unplug the printer, wait check for media jams. 5 minutes, plug it back in, and retry. If errors still exist, call HP Customer Support. 2) Kontroller, at tonerkassetten er installeret korrekt, hvis den nederste 3) Fjern DIMM’et, hvis alle indikatorer blinker, og udskift det om...
-
Page 14: Plug & Play
Plug & Play Installing on Windows 98 and Millennium (USB). 1) Connect the I/O 5) Select Specify a location, then type x:\98Me_USB\ (where x is the cable to the computer. 2) Reboot the computer. 3) In the Add New letter of your CD-ROM drive). 6) Follow the instructions on your screen. Hardware wizard, click Next. - Page 15 Installing on Windows 2000 (USB). 1) Connect the I/O cable to the 5) Select Specify a location. 6) Under Copy manufacturer’s files from, computer. 2) Reboot the computer. 3) In the Found New Hardware wizard, type x:\2000\ (where x is the letter of your CD-ROM drive), and click OK. click Next.
- Page 16 Installing on Windows 9X and Millennium (Parallel). 1) Connect the I/O 4) Select Search for the best driver for your device (recommended), cable to the computer. 2) Reboot the computer. 3) When the Installation and click Next. 5) Select Specify a location, then type x:\9xMe_LPT\ Wizard appears, click Next.
- Page 17 Installing on Windows NT (Parallel). (Note: You must have administrator Installing on Windows 2000 (Parallel). 1) Connect the I/O cable to the privileges.) 1) When the Installation wizard appears, click Software computer. 2) Reboot the computer. 3) In the Found New Hardware wizard, Installation.
- Page 18 5) Select Specify a location. 6) Under Copy manufacturer’s files from, type x:\2000\ (where x is the letter of your CD-ROM drive), and click OK. 7) Click Next. 8) Follow the instructions on your screen. 5) Marker Angiv en placering. 6) Indtast x:\2000\ (hvor x er betegnelsen på...
- Page 27 486 mm...
- Page 28 2001 Hewlett-Packard Co. *C7044-90923* *C7044-90923* www.hp.com/support/lj1200 C7044-90923...