Duraflame 20HM6007-C240 Mode D'emploi page 5

OPERATION INSTRUCTIONS
FUNCTION
POWER
TIMER
SETTING
TEMPERATURE
ECO MODE
COOL DOWN CYCLE
A392
ICON DESCRIPTION
The power button supplies power to all of the functions
of the fireplace. The power button will put the insert in a
standby mode. This will turn off all functions at once but
will hold the settings in the memory. By pressing the
Power button again the unit will turn on at the same
settings.
To change between °F and °C press and hold the POWER
button on the control panel for 3 seconds.
Press TIMER button will turn on or off timer settings.
There are 10 timer settings and OFF that can be selected.
OFF(00), 30min, 1Hour, 2H, 3H, 4H, 5H, 6H, 7H, 8H, 9H.
When pressing the up and down
will enter temperature setting mode.
When in temperature setting mode pressing the
buttons will change the thermostat by 1 °F (1 °C.)
The temperature setting range is between 50 °F - 97 °F
(10 °C - 36 °C).
After 10 seconds without control input the display will exit
temperature setting mode and show the current ambient
temperature.
Pressing this button will turn on/ off the ECO setting.
When enabled ECO Mode will use less energy when
running to maintain warmth.
After the heater has ran the fan will continue to run for a
period of time to cool down the internal parts.
5
buttons the display
www.tsicustomerservice.com