Operating Conditions; Introduction - Conrad Electronic GX106 Notice D'emploi

Operating conditions

Only operate the module with an operating voltage of between 5 and 30
Volt DC and observe the polarity. The power source must supply at least
700 mA.
The maximum switching voltage of the consumer connected to the
relays is 5A at 30V DC or 8A at 250V AC.
When installing the module, ensure a sufficient cable cross-section of
the connection leads.
The module may be operated in any position.
Never remove the SIM card in running operation!

Introduction

With this module, you can switch an output via a call, four outputs via
SMS, two analog inputs can measure temperatures, and four outputs
switch automatically acc. to adjustable temperature limit values, a third
analog input ADC (analog-digital converter) automatically sends an SMS
when a certain limit value is exceeded or undercut, with a PWM output
(pulse width modulated output), the pulse width can be set via SMS and
two optocouplers can automatically send an SMS when the level
changes.
For operation, you additionally need an activated SIM card of any net-
work operator of your choice.
30