Installation; Function Keys; Hyperx Ngenuity Software; Using With Console - HyperX Pulsefire Raid Mode D'emploi

Installation

Connect the USB connector to the computer.

Function Keys

Function Keys
DPI button

HyperX NGENUITY Software

To customize lighting, DPI, and macro settings, download the HyperX NGENUITY Software here:
hyperxgaming.com/ngenuity.

Using with Console

Connect the USB connector to PS4 or Xbox One to use with console.

Factory Reset

If you are experiencing any issue with the mouse, you can perform a factory reset. Onboard memory
will be cleared, and all settings will revert back to default.
Function Keys
Hold DPI button + mouse wheel
button down for 5 seconds
Questions or Setup Issues?
Contact the HyperX support team at:
Document No. 480HX-MC005B.A01
Change between DPI presets. Default values are:
- 800 DPI (blue).
- 1600 DPI (yellow).
- 3200 DPI (green).
Perform a factory reset on the mouse.
hyperxgaming.com/support/
HyperX Pulsefire Raid
Secondary Feature
Secondary Feature
TM
Page 5 of 5