Bissell REVOLUTION PET PRO 1986 Serie Guide De Démarrage Rapide page 12

Cleaning Your Carpet
1
3
Deep Clean Mode:
1. Press the spray trigger
to apply solution while
making 2 slow wet passes -
1 forward and 1 back.
2. Release the trigger.
3. Make 2 slow dry passes -
1 forward and 1 back, to
suck up the dirty solution.
(Do not hold down the
trigger for this step.)
NOTE: For best cleaning
performance, clean with
your machine in Deep
Clean Mode.
12
www.BISSELL.com
2
Plug into
a properly
grounded
outlet.
Press the power button
to turn the machine on.
Deep Clean Mode:
When using BISSELL
Deep Clean +
Antibacterial Formula
1. Press the spray trigger
to apply solution while
making 3 slow wet passes
- 1 forward, 1 back, and 1
forward again.
2. Release the trigger.
3. Make 1 slow dry pass
back, to suck up the dirty
solution. (Do not hold down
the trigger for this step.)
Select cleaning mode:
Deep Clean - Delivers a deep
clean to your carpet.
Express Clean - Provides a
lighter clean with about 1 hour
of dry time.
4
To recline your
machine for use,
press the recline
pedal with your foot.
NOTICE: To prevent
damage to Berber carpets,
avoid repeated strokes in
the same area.
Express Clean Mode:
1. Press the spray trigger to
apply solution while making
2 wet passes - 1 forward
and 1 back.
2. Release the trigger.
3. Make 2 dry passes -
1 forward, 1 back to suck
up the dirty solution.
(Do not hold down the
trigger for this step.)
NOTE: In Express Clean
Mode, the dirty tank
will not get as full as
when cleaning with Deep
Clean Mode.