Zanussi ZHC 605 Manuel D'instructions Pour L'installation, L'emploi Et L'entretien page 13

Mounting the hood body
• Screw the two screws 12d supplied onto the brackets 7.1.
• Hook the hood body onto the bracket 7.1, centring it around
the vertical line.
• Use the adjusting screws 12d underneath the hood to level the
hood body.
Connecting up to the ducting system
• The hood must be connected to the ducting system using a
rigid or flexible pipe Ø 100 or 120 mm, the choice of which is
left to the technician carrying out installation.
• The flange 9 is preset to fit the Ø 100 mm; to adapt it to fit the
Ø 120 mm it must be cut along the cutting line using a shoe
knife.
• Fix the flange 9 to the air outlet valve using the two screws
provided with the accessories
• Connect the rigid or flexible pipe (which should be fixed using
suitable pipe connectors, not provided) to the flange 9 and to
the ducting system. Suitable materials for the above operation
must be selected and provided by the fitter.
EN
12.d
7.1
ø 100
9
1 13