emerio HP-108628 Mode D'emploi page 3

11. Always remove the power cord and let it cool: Before
moving the unit; Before the unit is stored; Before you go
mounting or dismantle parts; Before cleaning or
maintenance work; After use.
12. Only have the appliance repaired by a qualified service
centre.
13. Qualified service center: after-sales service of the
manufacturer/importer, which is qualified to carry out
repair to avoid any kind of danger. In case of problems
please return the appliance to this service.
14. WARNING: If the surface is cracked, switch off the
appliance to avoid the possibility of electric shock.
15. The machine should not be operated by means of an
external timer-switch or by means of a separate system
with remote control.
16. WARNING!!
Electricity and heat
1. Before use, check that the mains power supply voltage is
the same and the voltage is the same as the voltage
indicated on the appliance.
2. Always plug the appliance into an earthed plug socket.
3. Regularly check the power cord for damage.
4. Do not operate any appliance with a damaged cord or
plug or after the appliance malfunctions, or is dropped or
damaged
manufacturer or the nearest authorized service agent for
examination,
adjustment.
Please do not touch surface while in use. The
accessible surface may get hot when the
appliance is operating.
in any
repair
manner. Return
or electrical
appliance
or mechanical
to