How To Use This Guide - Creo CXP3535 Guide Rapide

QuickConnect_3535.book Page 1 Monday, August 4, 2003 1:05 PM
Quick Connect Guide
Quick Connect Guide –

How to Use this Guide

Configuring the CXP3535 Color Server
This guide assists you with setting up the network and system
configuration settings for your CXP3535 Color Server. In addition, this
guide provides steps for setting up a network printer on the Macintosh and
Windows client workstations.
The CXP3535 Color Server was designed to connect to most networks
with minimal changes.
Step 1 describes the sequence for powering up the CXP3535 Color
Server. Steps 2 to 5 provide instructions on how to setup and confiure the
CXP3535 Color Server on the network.
Important: A Network Administrator is required in order to ensure that the
CXP3535 Color Server is configured properly on the network. The
Network Administrator must supply the appropriate TCP/IP settings (IP
Address, subnet mask, gateway address or DHCP settings).
For more detailed information and procedures refer to the
CXP3535 Color Server Technical Manual (Creo p/n: 653-00541A) or the
CXP3535 User Guide (Creo p/n: 653-00561A).
The first time configuration and setup is
performed during initial install of the
application software. After the
application software is installed and the
CXP3535 Color Server and Xerox
DocuColor 3535 is switched on, the
Configuration Wizard automatically
appears.
You can also access these settings in
the Administration window in the
CXP3535 Color Server workspace.
English (EN)
1