Creo CXP3535 Guide Rapide page 15

QuickConnect_3535.book Page 7 Monday, August 4, 2003 1:05 PM
Quick Connect Guide
Type the exact name of the CXP3535 Color Server (this box is case-
6.
sensitive) in the Printer Name or IP Address box.
7. Type a name for the printer that you will be able to identify on your
computer in the Port Name box.
8. Click Next.
Select Custom in the Device Type option, and then click Settings.
9.
10. Select the following options:
•
Protocol: LPR
•
LPR Settings:
- Queue Name: type the exact name of the network printer you want to
print to (for example., CXP1_ProcessPrint).
- LPR Byte Counting Enabled: selected.
11. Click OK > Next and then Finish.
12. Click Close in the Printer Ports window.
13. Click Close in the Printer Server Properties window.
The next step is to setup the TCP/IP port for printing using the
Adobe Printer Driver.
Setting up a TCP/IP Printer using Adobe PostScript Printer
Driver
Note: For more detailed information refer to the CXP3535 User Guide
(Creo p/n: 653-00561A).
1.
Start the Adobe PostScript Printer Driver application.
2. Follow the steps in the wizard, when prompted In the Printer
Connection Type window, select It is directly connect to your
computer (Local Printer), and then click Next.
3. Select the Standard TCP/IP port you defined earlier, for example,
CXP1_ProcessPrint LPR, and then click Next.
4. Select the CXP3535 Color Server PPD: CXP3535.ppd.
5. Follow through the rest of the steps in the wizard and then click
Finish.
7