FloTech FT530 Mode D'emploi page 6

SINGLE READ MODE TEST
1)
Be sure the TIM Reader is configured to match the type
of socket used on the trailer (THERMISTOR or OPTIC).
See pages 4 and 5 for CONVERSION instructions.
2)
Connect the Trailer Identification Module Reader (TIM
Reader) to the socket on the trailer.
3)
Press and immediately RELEASE red READ SWITCH
on TIM Reader housing.
4)
The SERIAL NUMBER of the Truck Identification Module
(TIM) will be read ONE TIME and the results shown on
the TIM reader display.
5)
The display will remain visible for 10 SECONDS and then
will automatically turn OFF.

If the TIM is working correctly, the SERIAL
NUMBER printed on the TIM will be shown on
the display.

If the TIM is NOT working correctly, the display
will show either "NO DATA READ" or
"INVALID DATA".

Pressing the red READ SWITCH a SECOND
time will turn on the LCD BACKLIGHT for
easier night viewing of the display.

Pressing the red READ SWITCH a THIRD time
will turn OFF the TIM Reader before the 10
second auto display time expires.
6