Remote Control - Technics ST-C700D Mode D'emploi

Remote control










8
(8)
∫ Buttons that work for this unit
1 [NWP Í]: Standby/on switch
Press to switch the unit from on to standby mode or vice
 versa. In standby mode, the unit is still consuming a small
amount of power.
≥ The remote control do not operate when the power switch
lever is in the lowered position.
2 [AMP]/[NWP]/[CD]: Select the device to be operated

3 [N INPUT O]: Select the input source
4 [DIMMER]: Adjust the brightness of the display, etc.
( 11)

5 [HOME]: Display HOME menu (

6 [INFO]: View content information

Press this button to display the track, artist, and album names,
file type, sampling frequency, and other information.

7 [3, 4, 2, 1]/[OK]: Selection/OK
8 [RETURN]: Return to the previous display

9 [MENU]: Enter menu (
: [DIRECT]: Turn on/off Direct mode (
; [RE-MASTER]: Turn on/off Re-master (

< Basic playback control buttons

= Numeric buttons, etc.

≥ To select a 2-digit number
Example:
16: [S10] > [1] > [6]
≥ To select a 4-digit number
Example:

1234: [S10] > [S10] > [S10] > [1] > [2] > [3] > [4]
≥ [CLEAR]: Clear the entered value.
∫ Buttons that work for the SU-C700/
SL-C700
The remote control of this unit also works for the
SU-C700/SL-C700.

For information on the operations of the SU-C700/SL-C700,
please also refer to their operating instructions.
1 Standby/on switch for the SU-C700
2 Standby/on switch for the SL-C700
3 Select the device to be operated
4 Select the input source of the SU-C700
5 Adjust the brightness of the display, etc.
6 Measure the characteristics of the amplifier and correct
its output
7 Adjust the volume
8 Mute the sound
11)
21, 22, 23, 24, 26)
25)
25)