System Requirements; Installation Instructions - USRobotics 9114 Guide D'installation Rapide

System Requirements

!
ADSL line installed by your Internet Service Provider
!
A computer with an Ethernet adapter installed
!
An HTML 4.01-compliant Web browser with JavaScript enabled

Installation Instructions

Step One: Connect Microfilter(s) (if included or required by your ISP)
A microfilter removes interference
between voice and ADSL signals. If a
microfilter was not included with the
router, ask your ISP if microfilters are nec-
essary for your telephony devices.
1. Plug each telephony device cable (tele-
phone, fax machine, etc.) into a micro-
filter.
2. Connect the microfilter into the telephone wall jack.
Note: Do not install a microfilter on the cable that will connect your router to
the telephone jack unless you have a dual connection microfilter with a
connection for both the router and the telephone.
Step Two: Connect Your Router
1. Connect your router to your ADSL line:
A. Connect one end of the included
phone cable to the
the router.
B. Connect the other end of the
phone cable to your wall tele-
phone jack.
port on
ADSL
English
3.3VDC
Reset
3