System Requirements; Installation Instructions - USRobotics ADSL2+ Guide D'installation Rapide

System Requirements

• ADSL line installed by your Internet Service Provider
• A computer with an Ethernet adapter (NIC) installed
• An HTML 4.01-compliant Web Browser (such as Internet Explorer
5.5 or later or Netscape 8.0 or later) with JavaScript enabled

Installation Instructions

Step One: Connect Microfilter(s) (if included or required by your ISP)
A microfilter removes interference between voice and DSL signals. If a
microfilter was not included with the Wireless ADSL2+ Router, ask your
ISP if microfilters are necessary for your telephony devices.
1. Plug each telephony device cable (telephone, fax machine, etc.)
into a microfilter.
2. Plug the microfilter into the telephone wall jack.
Note: Do not install a microfilter on the cable that will connect your
Wireless ADSL2+ Router to the telephone jack unless you have a
dual connection microfilter with a connection for both the router
and the telephone.
English
3