Proline L2436FHD LED Manuel D'utilisation page 25

23.8
Masquer les pouces Voir aussi pour L2436FHD LED:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Menu Operation
NOTE:
You should use a USB disk with at least 4GB capacity.
If the recording on the inserted USB disk failed, please format the disk.
Warning: do not disconnect the device while formatting is in progress. If you format
the device, all files will be deleted. Back up your files before making any
connections to the TV. Manufacturer will not be responsible for any file damage or
data loss.
If a USB device is partitioned, you can choose which partition to use to perform your
recording.
If PVR recording system is used all the time, it will exit PVR system automatically.
The connected USB device must support 2.0 speed.
Certain types of non-standard USB devices may not be supported.
• First Time Setup
This is a guide to help you to setup the TV.
• Reset
Restore the system settings to the factory default.
Please note that this will not delete the channels.
Using MEDIA mode
• To Access/Exit media mode
1. Connect a USB device.
2. Press SOURCE button to display the main menu. Use the ▲/▼ buttons to highlight
media, and press ENTER button to access the media mode.
3. You may also use the signal source selection menu to exit from the media mode.
NOTE:
Special USB devices may be not or not well supported.
USB maximum load: DC5V 500mA
23

Publicité

Table des Matières
loading

Table des Matières