2. Verify the that the Wi-Fi icon is not blinking. Press the Temp & Start/
Pause buttons simultaneously for 3 seconds. "AP" will now be
displayed.
3. After you touch the washer name tab you need to touch the "OK" tab
to proceed with the certification.
4. After you touch confirm tab you will now start preparing the
certification.
5. Follow the instructions displayed on the phone to start the washer
setup.
WF455AG-03159A-07_EN.indd 51
Figure 3
Figure 4
Figure 5
Figure 6
washing a load of laundry _51
2013-12-13 11:51:32