Samsung WF455ARG Serie Manuel D'utilisation page 39

STEP 12
STEP 13
STEP 14
STEP 15
WF455AG-03159A-07_EN.indd 39
When the network is setup the unit will display
"Transfer complete". After the transfer is
completed select "Confirm". The unit will then
display "oAP". The phone is now connected to
the machine through the network.
After the phone is connected
to the machine, press
the Temp & Start/Pause
buttons simultaneously for
3 seconds. After 3 seconds
the original wash cycle will
be displayed on the LED
screen.
After the wash cycle
has been displayed wait
approximately 1 minute. You
will then see the Wi-Fi icon
start to blink.
Once the Wi-Fi icon is
displayed press and hold the
"Signal" for 3 seconds. The
Wi-Fi icon will stop blinking.
The machine is now ready to
run the device certification.
washing a load of laundry _39
2013-12-13 11:51:17