Device Certification - Samsung WF455ARG Serie Manuel D'utilisation

washing a load of laundry
STEP 10
STEP 11
STEP 12

Device certification

1. The "Authentication" only needs to be run with
the initial setup. Touch the "Indoor control" tab
to search for the washer's name. Once the
washer 's name is displayed touch tab.
50_ washing a load of laundry
WF455AG-03159A-07_EN.indd 50
After the phone is connected
to the machine, press
the Temp & Start/Pause
buttons simultaneously for
3 seconds. After 3 seconds
the original wash cycle will
be displayed on the LED
screen.
After the wash cycle
has been displayed wait
approximately 1 minute. You
will then see the Wi-Fi icon
start to blink.
Once the Wi-Fi icon is
displayed press and hold the
"Signal" for 3 seconds. The
Wi-Fi icon will stop blinking.
The machine is now ready to
run the device certification.
Figure 1 Figure 2
2013-12-13 11:51:31