BRIONVEGA Radio Cubo ts525 Manuel D'instructions page 26

3.1.1 Time format
Select the desired time format (12h / 24h) and confirm your preference.
3.1.2 Date and time
The date and time can be set manually or automatically.
Automatic updates synchronise the date and time with the information received from
an external source. The automatic update is usually very precise.
Automatic update
The automatic update functions using information
received from the FM radio signal, the DAB, DAB +
radio signal or via the internet.
1. Select the desired
(DAB, DAB + signal, FM signal, network update,
no update)
No update will leave the time set manually unchanged.
2. Setting your geographical time zone:
3. If daylight saving time is used, the system will automatically update the time.
Note:
The system will be automatically updated when it receives new time information.
Manual settings
If automatic updates are not selected, the date and
time must be set manually..
Date and time are displayed in the following order:
dd-mm-yyyy for the date and hh:mm for the time.
Enter the information using the selection knob and
then press it to confirm the changes that were made.
3.1.3 Network
The Brionvega Collection TS525 radio is compatible
with the standard network communication protocols.
The following is required to connect the system to the
network:
1. an internet connection using a network cable, or
2. a WiFi internet connection with the relative ac-
cess key (if set).
Select your geographical region and the WiFi network
you want to access.
If the selected network does not require an access
key, the system will automatically connect without re-
quiring additional settings.
If the selected network is protected and requests an access key, the password win-
update source;
6