Assembly - Texas A/S Power Split 2000 VH Guide D'utilisation

Maximum Towing Speed
Maximum Log Length
Maximum Log Weight
Hydraulic Cylinder Bore
Hydraulic Cylinder Stroke
Maximum Log Diameter
The manufacturer reserves the right to make improvements in design and/or changes in
specifications at any time without incurring any obligation to install them on units
previously sold.

Assembly

Open Shipping Crate
1. Set the shipping Crate on a solid, flat surface.
2. Carefully cut the shipping bands and remove lid of shipping crate.
3. Using two people to lift, carefully remove the engine, oil tank, wheels, tow bar, support
legs, and hardware. (For parts reference see page16-18 in manual)
4. Leave the hydraulic cylinder/log cradle in the shipping crate until step 6 in the
assembly process.
5. Locate all hardware before beginning assembly.
30MPH
24 in
100 lb
4-1/2 in
23 in
12in
Fix the wheel to the oil tank (#39)
axle by a flat washer Ø20 (#25),
slotted nut M16x1.5 (#88), cotter
pin Ø4x36 (#52) and attach the
axle cap (#101).