Installing The Range; Installing The Anti-Tip Device; Level The Range - Samsung NE58F9500SS Manuel D'utilisation

installing the range

INSTALLING THE ANTI-TIP DEVICE

WARNING
WARNING
installing the Anti-Tip device packed with the appliance.
• Refer to the installation instructions supplied with the bracket.
• If the anti-tip device is not installed properly, an adult or child stepping on or sitting on the range
door could tip the range and suffer serious injuries caused by spilled hot liquids or by the range itself.
*approximately
21/32"(16.5 mm)
1. Install the bracket using the template
The Anti-Tip bracket is packaged with a template. The instructions include information necessary
to complete the installation. Read and follow the instructions on the sheet (template) for range
installation.

2. Level the range

Level the range by adjusting the leveling legs with a wrench.
Lower range
NE58F9500SS_AA_AC_DG68-00499A-09_EN.indd 27
To reduce the risk of tipping, you must secure the appliance by properly
Anti-Tip
bracket
Screw must enter
wood or concrete
Raise range
Leveling leg
English - 27
*NOTE: To install the Anti-Tip
bracket, release the leveling
leg. A minimum clearance of
21/32" (16.5 mm) is required
between the range bottom and
the kitchen floor.
2/2/2016 5:40:25 PM