Telefunken VCBH5 Mode D'emploi page 19

 IF THE SUPPLY CORD IS DAMAGED, IT MUST BE REPLACED BY
THE MANUFACTURER, ITS SERVICE AGENT OR SIMILARLY
QUALIFIED PERSONS IN ORDER TO AVOID A HAZARD.
 CHECK THAT THE VOLTAGE MARKED ON THE RATING PLATE
MATCHES TO YOUR LOCAL SUPPLY. IF NOT THE CASE, DO NOT
USE THE APPLIANCE AND SEEK FOR EXPERT ADVICE.
 CHECK THAT YOUR ELECTRICAL INSTALLATION IS SUFFICIENT FOR
SUPPLYING THIS APPLIANCE.
 TAKE ALL NECESSARY MEASURE WITH CORDS AND EXTENSIONS
TO AVOID ANY INJURIES WHILE IN USE.
 NEVER IMMERSE IN WATER OR ANY OTHER LIQUID THIS
APPLIANCE, ITS ELECTRIC PLUG AND CORD.
 ALWAYS UNPLUG THE APPLIANCE AND LET IT COOL DOWN
COMPLETELY BEFORE ANY CLEANING OPERATION.
 FOR YOUR OWN SAFETY, WE RECOMMEND YOU NEVER LEAVE
THE APPLIANCE IN A PLACE THAT IS EXPOSED TO HUMIDITY OR
INCLEMENT WEATHER CONDITION.
 DO NOT PUT THIS APPLIANCE ON TOP OF OTHERS.
 NEVER LEAVE APPLIANCE PLUGGED IN WHEN NOT IN USE.
 NEVER MOVE THE APPLIANCE WHEN IN USE.
 THE SUPPLY CORD SHOULD BE REGULARLY EXAMINED FOR
SIGNS OF DAMAGE AND THE APPLIANCE IS NOT TO BE USED IF
THE CORD IS DAMAGED.
 NEVER PLUG THE APPLIANCE AND TOUCH THE THERMOSTAT
WITH WET HANDS. NEVER USE THE APPLIANCE WITH BARE OR
WET FEET.
 NEVER UNPLUG THE APPLIANCE BY PULLING THE POWER CABLE.
ALWAYS UNPLUG THE APPLIANCE FROM THE MAIN SOCKET.
ENGLISH