Set-Up And Use; Assembly - Telefunken VCBH5 Mode D'emploi

SET-UP AND USE

Assembly

Remove the heater and its accessories from its packing. Ensure the heater is not damaged
before assembling it. Follow below instructions that match each drawing to assembly the unit.
1. Turn the heater upside-down and put it on the ground gently.
2. Insert each hook into each wheels metal base support.
st
3. Place the 1
nd
the 2 heating element under the power cord storage. Do not choose another location
as it will affect the stability of the oil radiator.
4. Securely fasten the wheels metal base support to the heater by screwing the wing nuts
into the bolt.
nd
5. Place the 2
th
and 13 heating elements.
6. Securely fasten the wheels metal base support to the heater by screwing the wing nuts
into the bolt.
7. Turn the radiator upright.
WARNING! ALWAYS CHECK THE WHEELS ARE WELL MOUNTED ON THE HEATER BEFORE
STATING TO USE IT.
wheels metal base support on the left side of the heater between the 1
wheels metal base support on the right side of the heater between the 12
2
ENGLISH
st
and
th