Installation Preparation; Product Dimensions; Installation Clearances - Cafe CVW9301 Manuel D'utilisation Et Instructions D'installation

PRODUCT DIMENSIONS

12"
18"
21"
30" Models
Requires a 30" opening.
12"
18"
21"
36" Models
Requires a 36" opening.
1" = 2.5 cm; 1' = 0.3 m
49-2000061 Rev. 2

Installation Preparation

29-7/8"
35-7/8"

INSTALLATION CLEARANCES

These vent hoods are designed to be installed onto
a wall. They may be installed beneath a soffit or
cabinet.
• The hoods are designed to fit 12" deep cabinets.
When installed onto 15" deep cabinets, a filler
panel accessory is available: Order JXS50SS for
30" wide hoods or JXS56SS for 36" wide hoods.
• Install these hoods 24" required minimum and 36"
recommended maximum above the cooking space.
SOFFIT INSTALLATION
SOFFIT
24" Required Minimum and
36" Recommended Maximum
In this installation, the ductwork running from the top
of the hood will be concealed in the soffit or upper
cabinetry.
WALL MOUNT INSTALLATION
24" Required Minimum and
36" Recommended Maximum
For this installation, a decorative duct cover is
available to conceal the ductwork running from
the top of the hood. Use of the duct cover requires
special consideration to the installation height above
the countertop. See page 13 for details.
9