Troubleshooting Tips - Cafe CVW9301 Manuel D'utilisation Et Instructions D'installation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Troubleshooting tips ... Before you schedule service
Save time and money! Review the charts on the following pages first and you may not need to schedule service.
Problem
Fan does not operate when
the switch is on
Fan fails to circulate air
or moves air slower than
normal
20
Possible Cause
A fuse may be blown or a circuit
breaker tripped.
The blower connector is loose
or not plugged into its mating
connector.
Excessively soiled filters.
What To Do
Replace fuse or reset circuit breaker.
Disconnect power to the unit. Remove the filters and look
up at the blower. If the blower connector plug is loose or
you see the connector dangling, the installer failed to plug
it in securely. Although it is a blind connection, it is easy
to plug in. See the Installation Instructions in this manual
for the plug location and how to plug the connector in.
Remove the filters, clean if necessary and replace them.
If cleaning and replacing the filters does not correct the
problem, schedule service.
Sufficient makeup (replacement) air is required for
exhausting appliances to operate to rating. Check with
local building codes, which may require or strongly advise
the use of makeup air. Visit cafeappliances.com for
available makeup air solutions.
49-2000061 Rev. 2

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Cvw9361

Table des Matières