GPO JAM Mode D'emploi page 17

Record Player
1. Plug the power cord into the wall outlet. Then the power light as light
blue prove
2. Rotate the VOLUME button on the back of the device in the
clockwise sense, to adjust the volume to the desired level.
3. Insert a peeling plate on the record player. Do not forget the 45 RPM
adapter in the upper right corner to use if a 45 RPM Disk play.
4. The white needle cover. Hold the needle cap in a safe and
accessible place for future use.
5. Select the correct speed according to the record, you play and move
the tonearm on the record player, the tone arm control indicator
lights up. Insert the arm on the edge of your disk and your record
starts to play.
Note:
You are strongly recommended to use the transparent dust cover to
play records. Also, do not place anything on the dust cover when the
turntable is in use.
1. To stop, move the pick-up arm manually on the armrest support.
2. If the album has reached the end, the pitch and the rotation stopped
and the tone arm control indication is switched off. Lift the pick-up
arm and insert it manually to the armrest.
3. Do not forget to place the white plastic needle cover back to protect
the needle and disconnect the record player from the wall AC outlet .
GPO_JAM_ EU_User_Manual_Oct2017_v2.indd 17
17
02/10/2017 21:28