Updating the Firmware
The Firmware of a BS-1000LAN Sensors may be reprogrammed by per-
forming the following steps:
E
1. Download the most recent Firmware versions at www.arexx.com
N
2. Unzip the ZIP-file.
3. Start Flash by right-clicking (Right Mouse Button = run as an Admin).
G
4. This will normally open a DOS-window.
L
I
S
H
5. Hit "enter" to proceed and Y.
6. The update has been successful as soon as Flash reports "success".
7. Restart the BS1000.
8. FIRMWARE UPDATES
71