Additional Features - Corsair T3 RUSH Mode D'emploi

ENGLISH
T3 RUSH ASSEMBLY INSTRUCTIONS
7. Attach the hinge covers onto the hinge
brackets with the screws using the Phillips
head on the end of the Allen key. Insert
the rubber plugs once the hinge covers
are fastened.
8. Congratulations on assembling your
new T3 RUSH gaming chair. Enjoy!
5

ADDITIONAL FEATURES

1. Attach neck pillow.
The neck pillow has a snap attachment that allows the pillow to be installed in two
different ways. You can slide the band over the top of the headrest for taller placement of
the pillow or attach the pillow through the holes in the neck area for a lower placement of
the pillow.
2. Place the Lumbar Pillow on the backrest for additional back support.
USER MANUAL
WARNING: Improper use of this chair may cause
damage to this chair or result in personal injury.
Please use this chair in a non-abusive manner.
1. Tilt lock / height adjustment lever.
Push the lever towards the center of the chair to
engage the tilt lock. Pull it away from the chair to
disengage the tilt lock.
To lower the height of the chair, pull the lever
upwards while weight is applied on the chair. To
increase the height, pull the lever up while the
chair is empty.
2. Recline lever
Pull this lever up to recline the seat back forward
or backward.
WARNING: Do not apply pressure to the seat
back prior to pulling the recline lever. The sudden
shift of weight may cause the chair to become
unstable which may cause damage to the chair
and/or result in personal injury.
6
ENGLISH