Corsair T3 RUSH Mode D'emploi page 3

ENGLISH
T3 RUSH BOX CONTENTS
A x1 B
Seat back Seat cushion
x1
D E
Seat control base Seat back hinge covers
x1
G H
Gas lift Chair base
x1
J K
M8 Allen / Phillips Hinge cover screws
screwdriver key
Note: Screw hardware has been pre-installed from the factory in the mounting locations to ensure a proper fit
and function during assembly.
x1 C
Neck / head and
lumbar pillow
x2
F
Hinge cover rubber plugs
x1
I
Chair wheels
x2
L
Mounting screws
(provided as extras)
1
T3 RUSH ASSEMBLY INSTRUCTIONS
WARNING: This furniture contains small parts that present a choking hazard for children
under 3 years of age. These parts are for adult assembly only and should be permanently
affixed to the furniture. Any unused parts should be stored or discarded properly.
1. Insert the chair wheels into the chair base by pressing the stud firmly into the holes on
the bottom of the base.
x1
x2
2. Install the gas lift and gas lift cover into
the top of the chair base by placing the
larger end into the hole in the center of
the chair base.
Place the gas lift cover over the gas lift
with the larger opening facing down.
Remove the red protective cover from
the top of the gas lift.
x5
WARNING: The seat height adjustment
will not function if the red protective cap
is not removed from the gas lift.
x2
2
ENGLISH