Chapter 2 Installation; Installing The Product - Gamko MG Serie Mode D'emploi

Chapter 2
Hint! Never install the refrigerator next to a heat source!
Operating principle
A refrigerator works by extracting heat from the space to be
refrigerated and to release this in the surrounding area.
For maximum air circulation it is recommended to allow at least 10cm
space around the refrigerator. Be very careful never to obstruct
the air inlets and outlets.
Place the product on a smooth surface.
1 Place the product at his position.
2 Make sure the product is standing level using a spirit level.
3 The product must be placed with feet to provide adequate air
circulation around the cabinet. This for an optimal operation of the
product and to dispose a possible leakages of R600a. Also, the legs
are used for product adjustment and leveling.
User Manual

Installing the product

Installation
35