Before Calling After-Sales Service - Teka RBF 78720 GBK Mode D'emploi

7 BEFORE CALLING AFTER-SALES SERVICE

Errors
Your fridge will warn you if the temperatures for the cooler and freezer are at improper
levels or if a problem occurs with the appliance. Warning codes are displayed in the freezer
and cooler indicators.
ERROR TYPE
SR "Failure" Warning
Freezer compartment is
LF
not cold enough
Refrigerator
LC compartment is not cold
enough
"Not cold enough"
LF and LC
Warning
Refrigerator
HC
compartment too cold
LOPO "Low voltage" Warning
If you are experiencing a problem with your
refrigerator, please check the following
before contacting the after-sales service.
Your refrigerator does not operate
Check if:
• Your fridge is plugged in and switched on
• The fuse has blown
• Is the temperature adjustment right?
• The socket is faulty. To check this, plug
another working appliance into the same
socket.
MEANING
There is/are some
part(s) out of order or
there is a failure in the
cooling process.
This warning especially
appears if there has
been a power failure
for a long period or
when the refrigerator is
operated for the first
time.
This warning especially
appears if there has
been a power failure
for a long period or
when the refrigerator is
operated for the first
time. Ideal temperature
for the refrigerator
compartment is +4
If you see this warning,
your foods are at risk of
spoiling.
This is a combination
of the LF and LC error
types.
The food will start to
freeze because the
temperature is too cold.
This is seen when the
power supply becomes
lower than 170 V.
WHY
Call a service agent for assistance as
soon as possible.
1. Use food within a short time period.
Do not freeze foods that has thawed.
2. Set the freezer temperature to colder
values or set the Super Freeze until
the compartment gets to normal
temperature.
3. Do not put fresh food in the appliance
until the fault has cleared.
1. Set the refrigerator temperature
to colder values or set the Super
Cooling mode until the compartment
reaches normal temperature.
2. Open the door as little as possible
C. until the fault clears.
o
You will see this failure when first
starting the appliance. It will clear
after the compartments reach normal
temperature.
1. Check if the Super Cooling mode is
switched on.
2. Decrease the refrigerator
temperature values.
This not a failure. This prevents any
damage to the compressor. This warning
will clear after the voltage reaches the
required level.
Your refrigerator is performing poorly
Check if:
• The appliance is overloaded
• The doors are closed properly
• There is any dust on the condenser
• There is an adequate distance between
the appliance and surrounding walls
Your refrigerator is operating noisily
The following noises can be heard during
normal operation of the appliance.
EN - 23
WHAT TO DO