Packing, Transport & Storage - CLAS PE 6002 Mode D'emploi

PE 6002 PE 6001
SCISSOR LIFT 3T DUAL CYLINDERS LOW RAISE DOUBLE SCISSOR LIFT 3T
PACKING, TRANSPORT & STORAGE
Packing (Picture 1)
Transport (Picture 2)
Transport (Picture 2)
Packaging can be lifted or moved by lift trucks, cranes or overhead cranes. In case of
slinging, a second person must always take care of the load, in order to avoid dangerous
oscillations.
During loading and unloading operations, goods must be moved by appropriate vehicles
such as trucks, ships or fork lift.
At the moment the goods are delivered, verify immediately that all of the items specified
in the delivery notes are included.
If finding missing parts, possible defects or damages to the goods caused during the
transport you should immediately inform the person in charge, or the carrier.
Furthermore, during loading and unloading operations, goods must be handled as shown
in the picture. (Picture 2)
It is important to point out that the goods, during loading and unloading operations,
when moved by other than common lift trucks must be handled as shown in Figure 2.
Storage:
The equipment should be stocked inside the warehouse, if stocked outside make sure
that the equipment stay off the water.
Use box tracks for ground transportation , use container when shipping.
Control box should be placed perpendicularly during the transport to prevent it to crash
against other goods.
Temperature range for machine storage: min -25ºC – max + 55ºC
Picture 1
Picture 2
29