Yoo Digital Home i.wip 2000 Notice D'utilisation page 37

• If you set the distance excessively, the robot cleaner may wrongly decide the path.
04. Press the [Indicator number] button to set a room number.
• Every time you press the button, the lamps are turned on in the order of "1-2-3-4-5-off".
• When two or more indicators are installed, room numbers should not be duplicated.
05. open the door.
• If you do not want to clean a room with the indicator in it, just close the door.
Mode
U S IN g th RoU gh SEtU P o f C LEA N I N g AR E AS
• you can make the robot cleaner work within a specified space (gray area in the figure).
• In addition to the example below, you can make other spaces in various forms.
• Indicator signals are transmitted into three front/right/left directions.
__________________________________________________________
Set cleaning areas
Indicator
Distance
Indicator number
Make limited cleaning areas
operate in the room assortment mode.
Set the output distance for room assortment si-
gnals.
Every time you press the button, the distance is
shifted as follows: 1m(•) – 3m(••) – 5m(•••).
Set to fit to the door width.
Set the room number.
When you use 2 or more indicators, room numbers
should not be duplicated.
USER'S MANUAL I.WIP 2000 37
EN