Yoo Digital Home i.wip 2000 Notice D'utilisation page 29

________________________________________________
CLEANINg thRoUgh MANUAL CoNtRoL 2(CoNtRoL of thE MotIoN)
When you use the motion control function of the remote controller, you can manually control the
robot in a convenient way.
Important
04. Use the motion shown in the figure below to manually control the robot.
__________________________________________________________ USER'S MANUAL I.WIP 2000 29
If no operations are detected for five (5) or longer seconds during motion control,
the motion control mode will be released.
01. If the main power switch of the robot is tur-
ned off, turn it on.
02. Press the [START/STOP] button if the robot
is in operation.
03. Press the button seen below to change the
remote controller operation mode for the mo-
tion control mode.
[Turning on/off the power - [POWER] button
from the remote controller]
Quickly flick the front of the remote controller
upward.
[Turning on/off cleaning mode - [OK/MANUAL]
button from the remote controller]
Slightly flick the remote controller toward left/
right.
the inhalation motor will start/stop working.
EN