Electrical Connection - fluidra DIGITAL SWIMSPA Manuel De Fonctionnement

Digital Compact Equipment Manual for Swimspa

2.3. ELECTRICAL CONNECTION

This equipment cannot be connected to an ordinary plug.
This equipment requires proper electrical installation. This should be
performed by a specialist following the electrical safety regulations in each
country.
The connection must be earthed.
Use a suitable cable section bearing in mind the power of the Spa and
distance from the switchboard.
Always follow the instructions indicated in:
manual.
WARNING – RISK OF ELECTRICAL DISCHARGE
Do not try to access any electrical component unless you are qualified or
are the Head of Maintenance.
Never access electrical elements with wet feet.
Do not connect the electrical equipment (differential switch in the ON
position) if the Spa is empty.
Correct earthing connection is essential
The earthing connection of the building should always be in perfect condition
to guarantee the safety of Spa users. If you have any doubts on this, ensure
that the earthing circuit is checked by qualified staff. The manufacturer cannot
be held liable for any possible damage or injury caused by unsuitable
maintenance of the earthing circuit.
ATTENTION – VERY IMPORTANT
ATTENTION
6
Safety Warnings of this
EN