Operation; Switching The Power Supply Of The Equipment On/Off; Filtering The Water - fluidra DIGITAL SWIMSPA Manuel De Fonctionnement

Digital Compact Equipment Manual for Swimspa

4. OPERATION

The compact equipment enables you to perform several operations. They are all controlled by the
Automatic-Manual Selector and the filter selector valve.
Note: This manual only details aspects referring to the use of the compact kit. For normal operation
of the Spa, please refer to the user manual of the Spa.
AUTOMATIC-MANUAL SELECTOR
No parts can be repaired by the user.
Do not try to repair this control box. Call your dealer or maintenance staff to request
technical assistance. The installation should be carried out by an authorised electrician
who should follow all the electrical connection instructions of this manual
The selector is provided with a fuse to protect the filtering pump against overvoltage.
If a fuse blows, the button projects and a white band can be seen. It should be pressed to
reset.

4.1. SWITCHING THE POWER SUPPLY OF THE EQUIPMENT ON/OFF

To connect the equipment to the power supply, it should be connected to the electrical supply,
placing the differential switch in the ON position. To switch it off, place in the OFF position.

4.2. FILTERING THE WATER

As this is a digital system, filtering is controlled automatically by the pre-programmed filtering cycles
or when the system detects a reduction in temperature and activates the system to heat the water.
(See the Spa manual for further information). When the kit is operating normally, the Automatic-
Manual Selector should always be in the automatic position.
WARNING - RISK OF ELECTRIC SHOCK
ATTENTION
12
SELECTOR VALVE
EN