Electrical Safety; Environmental Protection; Connecting To Earth - MX-PG D-PG 1000 Traduction Des Instructions Originales

5. Layout and items supplied (Fig. 1-3)
1. Carry handle
2. Tank cover
3. Petrol cock
4. Starter cable
5. Motor cover
6. Choke lever
7. ON/OFF switch
8. Earthing connection
9. 1x 230 V~ socket
10. Screwdriver handle
11. Screwdriver insert
12. Spark plug wrench
13. Oil filler jug
14. DC oulet adapter cable
15. Voltmeter
16. 12 V d.c. outlet
17. Overload cut-out
18. Output adjustment
6. Technical data
Engine
Model:
Engine: 2-stroke engine.OHV,1 cylinder
Cubic capacity:
Degree of compression:
Nominal speed:
Fuel tank volume:
Generator
Mains voltage (V):
Frequency (Hz):
Ampere (A):
Nominal power PRP (kW):
Power factor:
Power class:
Noise:
7. Before putting the generator into
operation
Remove the packaging material and check that all
items have been supplied. Place the generator on
a firm, flat surface near the electrical equipment
and ensure proper ventilation.

7.1 Electrical safety:

Electric supply cables and connected equipment
•
must be in perfect condition.
The generator is to be operated only with
•
equipment whose voltage specifications conform
with the generator's output voltage.
Never connect the generator to the power
•
supply (socket-outlet).
Keep the cable length to the electrical
•
equipment as short as possible.

7.2 Environmental protection

Dispose of soiled maintenance material and
•
operating materials at the appropriate collection
point.
Recycle packaging material, metal and plastics.
•
YK1E45F

7.3 Connecting to earth

3
63 cm
6,8:1
The housing is allowed to be connected to
-1
3600 min
earth in order to discharge static electricity. To
2,0 l
do this, connect one end of a cable to the earth
connection on the generator (Item 8) and the
other end to an external earth (for example an
earthing rod).
230 V
50 Hz
7.4 Topping up fuel
3,7 A
0,85
WARNING
1,0
Switch off and ensure you are in a well ventilated
G1
area.
95 dB(A)
Use only a mixture of unleaded regular petrol
and special 2-stroke engine oil in a mixing ratio of
50:1.
Important: Do not use a different mixing ration
and do not use pure petrol.
Do not use fuel if it is more than 2-3 months old.
7