Axis D2110-VE Guide D'installation page 20

AXIS D2110-VE Security Radar
• Pins (easy): This calibration is performed in the web interface by clicking in the reference
map. This is the easiest way to calibrate the reference map, and you can use it if you
do not have physical access to the site.
• Tracks (accurate): This calibration method requires a person to move in front of the
radar. This is the most accurate way to calibrate the reference map, but you can't use it
if there is a lot of other movement in the scene.
You can do this yourself while accessing the web interface from a mobile device, or have
someone else move and follow your instructions.
When moving around in the different steps, move to places that are easy to find in
the reference map.
How to calibrate the radar
1. To configure the radar, go to Settings > Radar > Calibration, click Start and follow
the instructions.
20