Nexgrill 920-0049 Manuel Du Propriétaire page 9

ASSEMBLY INSTRUCTIONS
STEP 1.
Place the counter weight for the
heater on the underside of the
stainless steel base fasten with four
screws. Align the indents in the
counterweight with the molded line
in the base. Use Screw set A.
(see picture)
STEP 2:
Attach support legs to the
base.Secure support legs to
the base using Screw set B.
Note: The large washer is
placed on the underside
of the base.
STEP 3:
Attach the post on the top of the 3 pcs
support legs. Use 6 sets Screw set C to
connect the post to the 3 pcs support legs
7