Table des Matières
Publicité
ASSEMBLY INSTRUCTIONS
STEP 9:
Attach the wheel assembly to
the base using four Screw set
D and two pcs 3/16 in. self
locking nut.
STEP 10.
Lift the center bar to engage the heater
wheels, as picture shows. Allow the
wheels to descend. Tilt the patio heater
away
from
the
wheels until the
mechanism locks in place.
STEP 11.
To fold the wheels up, tilt the patio heater away
from the wheels, lift the center bar fold the
wheels up until they lock in place.
SSTEP 12:
Attach the tank support bracket using four
Screw set C to the support legs.
STEP 13:
After assembly use the tank hook to
hold the LP Gas tank in place.
STEP 14:
Attach the gas regulator to the Gas
tank. Turn the plastic knob
clockwise and tighten it securely.
Note: Make sure to check for
leaks every time the tank has
been disconnected from the
regulator. (See leak testing)
13
Publicité
Table des Matières
