Sangean MMR-88 Mode D'emploi page 7

Inserting the supplied rechargeable battery
. Open the battery compartment on the back of the unit by pushing the
battery door following the arrow direction.
2. Insert the supplied rechargeable battery into the space in the
compartment. Make sure the battery is inserted with correct polarity as
shown in the compartment.
Recharging the radio
Note:
Please use one of the following methods to recharge your radio or when
the battery power indicator LED blinks indicating the battery power is
low.
. Using the supplied USB to Micro USB cable simply plug the USB end
into a USB socket on a computer, tablet or any USB power supply.
Then plug the Micro USB end into the Micro USB socket on the right
hand side of the radio.
2. Using an AC adapter with a Micro USB connector (not supplied) plug
the AC adapter into a standard AC outlet. Then plug the Micro USB
end into the Micro USB socket on the right hand side of the radio. The
battery power icon will illuminate showing that charging is in progress.
The CHARGE LED indicator will also be on at the same time during
the charging process.
NOTE:
The radio will begin charging the Lithium-ion battery. Charging time will
take approx. 2 hours to be fully charged. The battery power icon will
stop flashing when the radio is fully charged. Reduced power, distortion,
stuttering sounds or when the battery power indicator light is low are all
signs that the battery needs to be recharged.
NOTE:
The radio can play approx. 0 hours when the battery is fully charged.
GB
6