Led Flashlight - Sangean MMR-88 Mode D'emploi

Changing the AM/FM tuning step
In Europe and other parts of the world the AM tuning step is 9 kHz, in North
America the AM tuning step is 0 kHz. FM tuning steps also vary from
country to country. To change the AM/FM tuning step, proceed as follows.
. When the radio is turned OFF, press and hold the PRESET button for
approx. 2 seconds, the display will first show software version (e.g.
P01) then blink the FM tuning step 100 (kHz). During the blinking,
press Tuning UP/DOWN to cycle through 100 and 50 (kHz) tuning
step. Press PRESET button again to choose your desired FM tuning
step.
2. The display will then blink the AM tuning step 10 (kHz), press Tuning
UP/DOWN button to cycle through 10 and 9 (kHz). Press the PRESET
button again to choose your desired AM tuning step.
3. The radio will default to clock mode (radio is off) after re-setting tuning
step.
Note:
Re-setting the AM tuning step will erase all the preset AM stations.
Note:
Re-setting the FM tuning step will not erase preset FM stations.
Emergency Siren
The Emergency Siren will work when either the radio is switched on or
off. Simply press and hold Emergency Siren button for  second, this will
activate the siren until it's switched off by pressing the Emergency Siren
button for  second or the Power button.

LED Flashlight

The MMR-88 features 4 selections for the LED Flashlight. Press the
LED Flashlight button once for High, again for Low, again for Blinking
once more for SOS (Morse Code Distress Signal, three short flashes,
three long flashes, three short flashes) and one more time to shut the
Flashlight off. Or in any mode you can hold the Flashlight button down
until the Flashlight shuts off.