bloom fresco Instructions page 22

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 25
release triggers at your desired setting. You
will hear an audible click. Check the food tray
is locked in place by attempting to pull it free
of the highchair.
– The food tray can be locked in two positions.
– To adjust the tray, pull the left and right side
triggers located under the tray simultaneously
whilst sliding the tray forwards or backwards.
Release triggers at the desired setting. You
will hear an audible click. Check the food tray
is locked in place by attempting to pull it free
of the highchair.
– To remove the food tray, reverse the order of
assembly steps.
– The food tray is dishwasher safe, and is made
of FDA compliant food contact grade plastic
and stainless steel.
NOTE: Always check the tray is securely locked
in place by attempting to pull it free of the
highchair.
c8 -c0
Seat Unit Height and Seat Unit Recline
– To adjust seat height, disengage the
swivel/height resistor. Lift both A & B trigger
simultaneously, whilst pushing downwards
or pulling upwards to desired height, then
release the triggers.
– In highchair mode the seat unit can be
adjusted to three different recline positions.
– To adjust the seat unit between the upright
position to the first recline position, depress
the handle on the rear of the seat unit
upwards whilst rotating the seat upwards
or downwards to the desired position, then
release the handle. You will hear an audible
click. Check the seat unit is locked in position
by moving it.
– The food tray, mini tray, and safety bar can be
applied on the highchair for the upright and
first recline position.
WARNING:
• Highchair mode is designed for children 6
months to 6 months only. Always use the
safety harness.
• Always be sure your child is clear of moving
parts before making any adjustments.
Section D: Toddler Chair Mode
– suitable for 6 months to 6 kg/
79 lbs (refer to illustration section d)
d
-
d
Seat Pad Assembly
– (part #05) Place seat pad onto the seat unit;
secure onto velcro.
– (part #09) Behind the seat pad, pull open
storage compartment door located on the
inner face of seat unit.
– (parts #12, #13) From storage compartment,
take out the two 'C' shaped clips and the
crotch strap cover. Close the compartment
door.
– Snap the 'C' shaped clips on either side of the
seat unit; you will hear an audible click.
– Slide the crotch strap cover into the seat unit.
To remove the seat pad for cleaning, follow the
instructions given in the care & maintenance
section of this user guide.
eng
7

Publicité

Table des Matières
loading

Produits Connexes pour bloom fresco

Table des Matières