Class 1 Laser Product; Important Notice - Pioneer BDR-XU03T Mode D'emploi

CAUTION
This product is a class 1 laser product classified
under the Safety of laser products, IEC
60825-1:2007, but this product contains a laser
diode higher than Class 1. To ensure continued
safety, do not remove any covers or attempt to
gain access to the inside of the product.
Refer all servicing to qualified personnel.
The following caution label appears on your
unit.
ここを開くとクラス 3B の可視レーザ放射及び不可視レーザ
放 射 が 出 ま す。 ビ ー ム の 目 又 は 皮 膚 へ の 被 ば く は 危 険！
見たり触れたりしないこと。
CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
CAUTION: THE USE OF OPTICAL INSTRUMENTS WITH THIS PRODUCT WILL INCREASE EYE HAZARD.
For PLUGGABLE EQUIPMENT, the socket-outlet shall be installed near the equipment and shall be
easily accessible.

IMPORTANT NOTICE

RECORD THE MODEL NUMBER AND SERIAL NUMBERS OF THIS EQUIPMENT BELOW.
THE NUMBERS ARE ON THE BOTTOM.
MODEL NO. BDR-XU03T
SERIAL NO.
KEEP THESE NUMBERS FOR FUTURE USE.

CLASS 1 LASER PRODUCT

Location: Top of built-in drive and rear of
outer mounting case
Location: Top of built-in drive
D58-5-2-2b*_A1_En
D58-5-1-2a_A1_En
D1-4-2-6-2*_A1_En