Placement Of The Air Compressor - Power Fist U252SVPA Manuel De L'opérateur

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Pre-Operation (continued)

PLACEMENT OF THE AIR COMPRESSOR

WARNING: If any parts are damaged or missing do
not operate this product until the parts are replaced.
Failure to heed this warning could result in serious
personal injury.
CAUTION: Do not use in an environment that is dusty
or otherwise contaminated. Using the air compressor in
this type of environment may cause damage to the unit.
NOTE: Long lengths of electrical wiring could cause power
loss to the motor.
Place the air compressor in a clean, dry, and well
ventilated area.
The air compressor must be positioned at least 18
in. (50 cm) away from the wall or other obstructions
that will interfere with the flow of air.
Locate the air compressor as close to the main
power supply as possible to avoid using long
lengths of electrical wiring.
The air filter must be kept clear of obstructions
which could reduce air flow to the air compressor.
Visit www.princessauto.com for more information
10 - ENG
18 in.
(50 cm)

Publicité

Chapitres

Table des Matières
loading

Produits Connexes pour Power Fist U252SVPA

Table des Matières