Led Indicators And Control Panel - Beko BU 1200 HCA Mode D'emploi

LED indicators and control
panel
LED indicators in the front section of your
refrigerator are intended to help you in
monitoring the operation of your appliance.
Keep your food in the refrigerator in a safe
manner by monitoring and using these
LEDs and controls as explained below:
Fast Freeze Button (1): Used to freeze the
food fastly. Compressor may not operate
immediately but after some time when the
button is pressed and this is quite normal.
Thermostat Setting Button (2): Used to set
your refrigerator between minimum and
maximum values.
Orange LED (3): Lights up when the fast
freeze button on the LED panel is pressed.
In this case, your refrigerator operates
continuously.
Press the button again when the food
you would like to fast freeze comes to the
desired temperature and the orange LED
will turn off.
Green LED (4): Lights up continuously after
plugging in your refrigerator.
Red LED (5): It warns you by lighting up
continuously when your refrigerators start
to operates, if not enough cooling effect
is obtained, when the door remains open
for a long time and when excessive food is
loaded.
If the red LED lights up continuously when
the conditions stated in the adjacent
column do not exist, then call our
Authorized Service.
10
EN